Engineered Fire Systems

Clean Agent Suppression Systems
We are an authorized distributor of Ansul Inergen and Kidde-Fenwal FM-200 clean agent fire suppression systems. Our people are factory-trained in the design, installation, and service of these systems. Each of these two agents are safe for normally occupied spaces and make an excellent choice for protection of your computer room, telephone switch room, or any other vital electronics hazards you might have.

Room Integrity Testing
A leaky room is the downfall of any clean agent fire protection system. The new NFPA room integrity test is a procedure developed to locate the sources of leaks and predict retention time, without discharging the agent utilizing Retrotec hardware & software. Our factory-trained technicians perform acceptance tests and periodic retests.

Foam Systems & Products
All Ansul Foam products are designed, tested, and listed to perform together. The Foam agents, storage tanks, proportioning equipment, and discharge devices provide a reliable system. Ansul's quality products, coupled with Getz's first rate service and maintenance, will allow you to rest easy knowing you're protected. Applications include: Hangars, Heliports, Fuel Storage & Loading Racks, etc...

Carbon Dioxide Systems
The ORIGINAL CLEAN FIREFIGHTING AGENT -- We design, install, and service Ansul Carbon Dioxide systems. They provide automatic or manual protection for hazards where Class A (deep seated), Class B (flammable liquid & gases), and Class C (electrical) fire may occur. Examples include: Diesel Engine Rooms, Printing Presses, Heat Treating & Quench Tanks, etc...

Dry Chemical Systems
Another agent well suited for Class B & C fires is Dry Chemical. Certain forms of Dry Chemical are suitable for Class A fires as well. Getz has the full line of Ansul engineered and pre-engineered Dry Chemical products available. Let us analyze your hazard area to determine if you have an application (Paint Booth, Dip Tank, Indoor Transformer, Generator Set, etc.), for which Dry Chemical can be utilized.


Emergency Lights
Emergency lights are serviced to
ensure the proper performance
during power outages.

Emergency Lights & Exit Signs
We are an authorized service center for Dual-Lite emergency and exit lighting products. All service is performed by our factory-trained technicians; familiar not only with Dual-Lite products, but those of other major manufacturers as well. Has anyone checked your emergency lighting recently? We offer a full line of batteries and other replacement parts.

Leak Location/Detection Systems
In most monitoring situations, just knowing you have a leak is not enough. You need to know: where it is, where it started, when the leak occurred, and if there is more than just one. Getz can provide this type of information instantly, with the Permalert PAL-AT system. Applications include: Computer Room Subfloors, Double Walled Tanks, Drop Ceilings, Pharmaceutical Storage, Museums, etc...

Fire Alarm Systems
We offer a complete line of state-of-the-art fire alarm equipment manufactured by the Notifier Co.. Systems range from small, conventional zoned systems to microprocessor-based/software controlled systems, to an intelligent, fully addressable system. Perhaps you need a central alarm panel to monitor other systems such as sprinklers, gaseous suppression, or water detection. Whatever the case, we can design, install, and service a system to meet your needs.

Flame Detection Systems
When you think of flame detection, you think of Det-Tronics, the industry leader in optical fire detection, gas detection, and burner management system design and manufacture. Getz is an authorized distributor for the complete line of Det-Tronics products. We have factory trained personnel qualified to perform field service and ensure your system is operating properly. Perfect for: Hangars, Nuclear Surveillance, Printing Presses, Fuel Loading Station, etc...

Explosion Systems
Fenwal Safety Systems is recognized as the leader in explosion protection. Products for explosion venting, isolation, and even suppression are available. Getz stocks most of the items necessary to service your system. This allows for quick recharges to help you avoid costly downtime. A must for Grain Elevators, Dust Collectors, and all Pulverizing and Conveying Equipment.

Manufacturers We Represent

 


Getz Fire Equipment Company
Shipping Address:
1615 S. W. Adams Street
Peoria IL 61602-1782
Mailing Address:
P. O. Box 419
Peoria IL 61651-0419

Phone: 309-673-0761
Toll Free: 800-747-3473
Fax: 309-673-8067
Email: getz@getzfire.com


HOME

Introduction  |  Carbon Dioxide Fire Suppression Dry Chemical Industrial Fire Protection  |  Fenwal AnaLASER HSSD  |  Fenwal Explosion Suppression Systems  |  Fenwal FM 200  |  Fire Alarm Systems  |  Fire Sprinkler System Inspections  |  Firetrace Fire Suppression  |  Foam Systems  |  Future of HALON  |  Inergen Clean Agent Systems  |  Low Pressure CO2 Systems  |  Room Integrity Testing